K11 Owners Group

rpilote · Joined: 17 Aug 2014 Posts: 5

Hi guys and gals, I am a newbee to this site. I have a new to me k1100lt. I had to do some work on it, new front brake lines, oil change, battery, etc. Bike started and ran great. When I was finished today, I shut the ignition off, and turned the handlebars. It locked, and now I dont seem to be able to unlock it..I really feel dumb, but am I missing something? Thanks, Rich

Jim · Posted: Tue Sep 02, 2014 7:35 pm Post subject:

Rich - wiggle the bars a little as you turn the key toward the unlock position.

There's OFF, and then there is LOCK - and I think past that, the ignition switch turns on your parking lights.
_________________
Jim
1997 K1100LTSE 94,000 - still has gremlins!
1995 R100RT Classic 16,650 crashed - repaired!
1992 K75RTP 46,000

"We shall not all die, but we shall all be changed."

Scott_Anderson · Posted: Tue Sep 02, 2014 10:20 pm Post subject:

If the "lock" hasn't been used for a long time, it can get bound up with crud and grime and give you some grief.....

Like Jim mentioned, work it carefully. Try to avoid any liquid lubricants(that aren't made specifically for using in lock tumblers) like WD40 or 3-in-1 oil, as they will just attract more dirt and make it worse in the long run.....
Tri-Flow is a good one that our locksmiths use at work.
_________________
Ride safe.

1995 K1100LT 0302044
2017 FLHTK Ultra Limited
Garmin StreetPilot 2820
Garmin Zumo 550
Garmin Zumo XT
"One who does not ask questions is ashamed to learn" Danish proverb
1997 K1100LT 0302488(R.I.P.)
1997 R1100RT ZC62149(sold)