drikko
Flying Brick Rider
Joined: 20 Nov 2009
Posts: 1966
Location: Brisbane, OZ
|
 Posted: Fri Jan 28, 2011 4:52 am Post subject: Speed bleeders for the K1100 |
 |
|
Thought I'd post which speed bleeders you need for the K1100RS, I assume although could be wrong that the LT will be the same.... This is of course with ABSII
For the 3 calipers you need 3 X SB1010S ie the short ones. Available in steel or stainless steel.
For the ABS you need 2 X SB1010 ie the longer ones. Available in steel or stainless once again.
BTW, bleeding both the ABS and claipers was as easy as with these!! Brakes feel better than ever, no vacuum or pressure pumps needed, just some brake fluid and hand action.....
_________________
K1100RS '97
Laverda RGS 1000 '84
Jim Young Trailer Sailer 5.7M WB
DISCLAIMER:- Anything I say may have been when I was drunk so please don't take it personally.
'Bigamy is having one wife/husband too many. Monogamy is the same.'
Oscar Wilde |
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
