| View previous topic :: View next topic |
| Author |
Message |
ChrisWeeK1100RS Flying Brick Rider
Joined: 06 Sep 2009 Posts: 162 Location: Malaysia
|
Posted: Mon Nov 16, 2009 9:35 pm Post subject: K1100RS Headlight high beam / flash switch |
|
|
Hey guys,
Something weird has happened and I was wondering if any of you have experienced this: the yellow thumb switch on the left side of the handlebar which controls the high beam (push up) and 'flash/pass' (jab down) has gone - sorry to use a highly technical term here - wonky.
Coming off the high-beam, sometimes the regular light does not come back on, and it's the same way if I use the flash/pass function. I have to 'jiggle' the switch to get the regular light to come back on. And sometimes if i just touch that switch, the main light goes off...
My mech says that this is a known problem with K's and suggested I spray in a bit of WD-40 which should help with the connection, but that didn't work either...
The light switch on the right side is working fine though. Any ideas?
Thanks guys!
Chris _________________ "Ride hard or stay home..."
'93 BMW K1100RS
Mileage: 37,000km-ish
Malaysia |
|
| Back to top |
|
 |
Flying Duck PsyKotic Waterfowl

Joined: 27 Jan 2005 Posts: 10102 Location: Bumf***, WA
|
Posted: Mon Nov 16, 2009 10:04 pm Post subject: |
|
|
37k is a little early for that siwtch to go out - unless it's gotten a lot of use. _________________ 93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE |
|
| Back to top |
|
 |
ChrisWeeK1100RS Flying Brick Rider
Joined: 06 Sep 2009 Posts: 162 Location: Malaysia
|
Posted: Mon Nov 16, 2009 10:12 pm Post subject: |
|
|
| Flying Duck wrote: | | 37k is a little early for that siwtch to go out - unless it's gotten a lot of use. |
Exactly. Maybe it's more from lack of use? The bike was idle for 8 years...
Chris _________________ "Ride hard or stay home..."
'93 BMW K1100RS
Mileage: 37,000km-ish
Malaysia |
|
| Back to top |
|
 |
Flying Duck PsyKotic Waterfowl

Joined: 27 Jan 2005 Posts: 10102 Location: Bumf***, WA
|
Posted: Mon Nov 16, 2009 10:19 pm Post subject: |
|
|
If you're very careful you can take it apart and clean the contacts. Take it off of the bike and do it on a table. (Or in a shoebox so little parts don't run away.) _________________ 93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE |
|
| Back to top |
|
 |
Mystic Red Flying Brick Rider

Joined: 28 Mar 2005 Posts: 2330 Location: Twin Lakes Idaho
|
Posted: Mon Nov 16, 2009 10:26 pm Post subject: |
|
|
I reconditioned mine 15K ago and still good. TAKE APART IN BAG! Springs will go everywhere. I'll see if I can find the manual.
Here ya go, Chris:
http://www.ibmwr.org/ktech/headlight-switch.shtml _________________ Scott Hespelt, '94 K11LT
K11 OG #466 |
|
| Back to top |
|
 |
ChrisWeeK1100RS Flying Brick Rider
Joined: 06 Sep 2009 Posts: 162 Location: Malaysia
|
Posted: Mon Nov 16, 2009 10:53 pm Post subject: |
|
|
Hey thanks guys! I've checked out the link, sounds a bit complicated but I think I have the tools necessary, will try to give it a shot tonight
By the way, what does (BTDT-WDIA) mean? '(BTDT)' was used a lot in that linked article...
Cheers!
Chris _________________ "Ride hard or stay home..."
'93 BMW K1100RS
Mileage: 37,000km-ish
Malaysia |
|
| Back to top |
|
 |
Saltcreek Flying Brick Rider

Joined: 22 Oct 2008 Posts: 957 Location: New Hampshire
|
Posted: Mon Nov 16, 2009 10:54 pm Post subject: |
|
|
Chris, my switch failed @ 33,000 miles. I took it apart after installing a switch Scott_Anderson gave me but I never got it to work right. I think Drake has some switches and a new one is a little over $100. _________________ Jim
1994 K1100LT Mystic Red, bfd, 37000 miles, sold
2009 Wilderness Systems Zephyr 155 ST
2002 Litespeed titanium |
|
| Back to top |
|
 |
Flying Duck PsyKotic Waterfowl

Joined: 27 Jan 2005 Posts: 10102 Location: Bumf***, WA
|
Posted: Mon Nov 16, 2009 10:56 pm Post subject: |
|
|
BTDT = Been there, done that. _________________ 93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE |
|
| Back to top |
|
 |
ChrisWeeK1100RS Flying Brick Rider
Joined: 06 Sep 2009 Posts: 162 Location: Malaysia
|
Posted: Mon Nov 16, 2009 11:00 pm Post subject: |
|
|
| Saltcreek wrote: | | Chris, my switch failed @ 33,000 miles. I took it apart after installing a switch Scott_Anderson gave me but I never got it to work right. I think Drake has some switches and a new one is a little over $100. |
Hey Jim! Scott is awesome, did I tell you guys he gave me his spare side-stand exhaust rubber bump stop that I posted about some time ago? He mailed it over, it's on my bike already What a star.
The 'new switch' you mentioned, is it the whole assembly? Or just the yellow button switch and whatever's connected to in at the back?
Chris _________________ "Ride hard or stay home..."
'93 BMW K1100RS
Mileage: 37,000km-ish
Malaysia |
|
| Back to top |
|
 |
ChrisWeeK1100RS Flying Brick Rider
Joined: 06 Sep 2009 Posts: 162 Location: Malaysia
|
Posted: Mon Nov 16, 2009 11:02 pm Post subject: |
|
|
| Flying Duck wrote: | | BTDT = Been there, done that. |
Gah! I knew that...no I didn't. Thanks!
Chris _________________ "Ride hard or stay home..."
'93 BMW K1100RS
Mileage: 37,000km-ish
Malaysia |
|
| Back to top |
|
 |
Mystic Red Flying Brick Rider

Joined: 28 Mar 2005 Posts: 2330 Location: Twin Lakes Idaho
|
Posted: Mon Nov 16, 2009 11:12 pm Post subject: |
|
|
Chris, try cleaning yours up before you bale on it. Contacts are probably corroded. Put it back together with dietetic grease so it won't corrode again. _________________ Scott Hespelt, '94 K11LT
K11 OG #466 |
|
| Back to top |
|
 |
Saltcreek Flying Brick Rider

Joined: 22 Oct 2008 Posts: 957 Location: New Hampshire
|
Posted: Mon Nov 16, 2009 11:14 pm Post subject: |
|
|
I believe it is the whole left hand combination switch, wire and plug.
Sorry, it's $157.81 _________________ Jim
1994 K1100LT Mystic Red, bfd, 37000 miles, sold
2009 Wilderness Systems Zephyr 155 ST
2002 Litespeed titanium |
|
| Back to top |
|
 |
Phil Marvin Rider in the Sky
Joined: 03 Apr 2003 Posts: 1389 Location: El Paso, Texas, USA
|
Posted: Tue Nov 17, 2009 1:58 am Post subject: |
|
|
Hi, Chris,
Jim Davis at Eastern Beaver (I don't know his address, but someone on this list will) sells a relay kit which will give you more light and protect your light switch. I would add his relay kit after you repair or replace your current switch. _________________ Ride Safe,
Phil Marvin in El Paso, TX
'94 K75A/3
'95 K75RTP |
|
| Back to top |
|
 |
hirschhs Flying Brick Rider

Joined: 28 Dec 2006 Posts: 343 Location: Bucks, UK
|
Posted: Tue Nov 17, 2009 3:43 am Post subject: |
|
|
http://www.easternbeaver.com/
Some great stuff there. _________________ Cheers, Steve H _______________________________________
K-less in Bucks
2001 ST1100A
1994 Yamaha 600 Diversion 'Hers'
2006 Kawasaki Z750s 'Hers'
 |
|
| Back to top |
|
 |
|