| View previous topic :: View next topic |
| Author |
Message |
Mystic Red Flying Brick Rider

Joined: 28 Mar 2005 Posts: 2330 Location: Twin Lakes Idaho
|
Posted: Tue Jun 09, 2009 7:11 pm Post subject: Cruise Control Problem |
|
|
My cruise does not work when I ride to work in the AM but performs flawlessly when coming home in the PM. This has been happening for the last 2 or 3 weeks. I've put off diagnosing because I thought I was crazy. My thought was my cooler weather riding gloves weren't allowing me to properly depress the set button cause how in the hell does a cruise control know what time of day it is?!
Yesterday I finally got it to set in the morning but it kicked out after a couple of hundred yards and today riding home I had on the heavier gloves and it set and worked perfectly. So much for the glove theory.
Pretty sure it's got to be a connection in the brake light wire or the actual brake light itself but I will entertain any other suggestions.
Checked and cleaned all the brake light connections in the tail light. Don't think that's the problem though. We'll see tomorrow AM. I think it might be the purple wire that hooks to the brake light wire. If that doesn't do it....on to more testing. _________________ Scott Hespelt, '94 K11LT
K11 OG #466 |
|
| Back to top |
|
 |
rkildu Flying Brick Rider
Joined: 08 Nov 2005 Posts: 221 Location: Arkansas
|
Posted: Tue Jun 09, 2009 9:38 pm Post subject: |
|
|
I had some similar issues for a while. Be sure that that your brake light switchs are not sticking and leaving your brake lights on. I had a problem with a gummy master cylinder on the handlebar. Rebuilt it once and finally just replaced it.
Other issue was with the tap to the coil. The t-taps are junk. I finally stripped a bit of the wire and soldered a short pigtail to it and used a good insulated spade connecter there.
I have also had some issues with bulky gloves on the buttons. Some gloves just don't work well. _________________ Rod Kilduff
97 K1100LT HighLine
82 R100Lufty |
|
| Back to top |
|
 |
Scott_Anderson Site Admin
Joined: 05 Sep 2006 Posts: 3122 Location: Central Iowa, USA
|
Posted: Tue Jun 09, 2009 10:02 pm Post subject: |
|
|
How's the moisture/humidity in the morning.
I have had (not what I would consider a problem) happen more than once, when setting the speed it takes quite a while to engage, sometimes 1/4 to 1/2 mile before it picks up.
I'm kind of like you, Scott, thinking that it's in the brake sensing circuit somewhere. _________________ Ride safe.
1995 K1100LT 0302044
2017 FLHTK Ultra Limited
Garmin StreetPilot 2820
Garmin Zumo 550
Garmin Zumo XT
"One who does not ask questions is ashamed to learn" Danish proverb
1997 K1100LT 0302488(R.I.P.)
1997 R1100RT ZC62149(sold) |
|
| Back to top |
|
 |
Mystic Red Flying Brick Rider

Joined: 28 Mar 2005 Posts: 2330 Location: Twin Lakes Idaho
|
Posted: Tue Jun 09, 2009 10:15 pm Post subject: |
|
|
Rod, first thing I checked was the brake light. It's dark at 3 AM so all I had to do is look in the mirrors. Coil tap is a posi-loc but they are not infallible.
It's really odd that it only happens in the morning.  _________________ Scott Hespelt, '94 K11LT
K11 OG #466 |
|
| Back to top |
|
 |
Flying Duck PsyKotic Waterfowl

Joined: 27 Jan 2005 Posts: 10102 Location: Bumf***, WA
|
Posted: Tue Jun 09, 2009 10:30 pm Post subject: |
|
|
Clean the contacts and try a new bulb. _________________ 93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE |
|
| Back to top |
|
 |
chris Sunderland Big Brick Rider
Joined: 09 Jun 2007 Posts: 62 Location: Northern Nevada
|
Posted: Wed Jun 10, 2009 2:29 pm Post subject: |
|
|
This is really funny, because I had a failure this weekend. I was going to post a thread, but it is already started.
I rode over the Sierra's on Saturday morning and the Cruise worked fine. But on Sunday for the ride home, it didn't work at all. I checked the brake light at a gas stop and it works fine.
On Monday, I started trying to diagnose it. I put the bike on the center stand and ran it up to 80, set the cruise and it worked.
I guess that I will check for an inconsistant connection at the coil, the cruise/brake light wiring and the bulb to socket connection.
Thanks for the ideas. _________________ '04 WR450f
'93 K1100LT |
|
| Back to top |
|
 |
Mystic Red Flying Brick Rider

Joined: 28 Mar 2005 Posts: 2330 Location: Twin Lakes Idaho
|
Posted: Wed Jun 17, 2009 6:45 pm Post subject: |
|
|
Went thru all the connections this weekend, all tested good. Then when I took it to work it didn't work at all. I knew it HAD to be the brake light connection so I rechecked these. The next day it worked perfect. While I was in there I changed the 4 and 5 switch to off/off and it really helped with speed control. Now instead of +-2mph it's + - 1mph. It rocks! _________________ Scott Hespelt, '94 K11LT
K11 OG #466 |
|
| Back to top |
|
 |
Flying Duck PsyKotic Waterfowl

Joined: 27 Jan 2005 Posts: 10102 Location: Bumf***, WA
|
Posted: Wed Jun 17, 2009 6:54 pm Post subject: |
|
|
| Mystic Red wrote: | | Went thru all the connections this weekend, all tested good. Then when I took it to work it didn't work at all. I knew it HAD to be the brake light connection so I rechecked these. The next day it worked perfect. While I was in there I changed the 4 and 5 switch to off/off and it really helped with speed control. Now instead of +-2mph it's + - 1mph. It rocks! |
That's very interesting. I'm about put install one on my "new" K75 and was planning to use off/off since that bike has less oomph.... _________________ 93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE |
|
| Back to top |
|
 |
Mystic Red Flying Brick Rider

Joined: 28 Mar 2005 Posts: 2330 Location: Twin Lakes Idaho
|
Posted: Wed Jun 17, 2009 9:45 pm Post subject: |
|
|
Drake, I would consider checking it out on the 11's also. quite a bit smoother. _________________ Scott Hespelt, '94 K11LT
K11 OG #466 |
|
| Back to top |
|
 |
Jim Site Admin

Joined: 17 May 2003 Posts: 3841 Location: WHERETHEFUNNEVERENDS
|
Posted: Wed Jun 17, 2009 10:04 pm Post subject: cruise control |
|
|
| Scott_Anderson wrote: | How's the moisture/humidity in the morning.
I have had (not what I would consider a problem) happen more than once, when setting the speed it takes quite a while to engage, sometimes 1/4 to 1/2 mile before it picks up.
I'm kind of like you, Scott, thinking that it's in the brake sensing circuit somewhere. |
Scott - I have a similar issue with the cc kicking in - as long as I'm operating the throttle, it won't kick in - when I let go of the throttle, the speed drops down a little, then the cc takes over.
If I can get to the switches, I'll make the other Scott dipswitch change. _________________ Jim
1997 K1100LTSE 94,000 - still has gremlins!
1995 R100RT Classic 16,650 crashed - repaired!
1992 K75RTP 46,000
"We shall not all die, but we shall all be changed." |
|
| Back to top |
|
 |
Scott_Anderson Site Admin
Joined: 05 Sep 2006 Posts: 3122 Location: Central Iowa, USA
|
Posted: Wed Jun 17, 2009 10:21 pm Post subject: |
|
|
| chris Sunderland wrote: | | I guess that I will check for an inconsistant connection at the coil, the cruise/brake light wiring and the bulb to socket connection. |
This spring while I was installing on the '95 I thougth about Posi-Taps and decided instead to solder all the connections. This unit has worked flawlessly(other than occasional slow engagement).
I also tapped the wire going to the dash tach instead of the coil wire, as I was in the harnes wiring up my Fuel Plus anyway. _________________ Ride safe.
1995 K1100LT 0302044
2017 FLHTK Ultra Limited
Garmin StreetPilot 2820
Garmin Zumo 550
Garmin Zumo XT
"One who does not ask questions is ashamed to learn" Danish proverb
1997 K1100LT 0302488(R.I.P.)
1997 R1100RT ZC62149(sold) |
|
| Back to top |
|
 |
Scott_Anderson Site Admin
Joined: 05 Sep 2006 Posts: 3122 Location: Central Iowa, USA
|
Posted: Wed Jun 17, 2009 10:40 pm Post subject: Re: cruise control |
|
|
| Jim wrote: | | Scott_Anderson wrote: | How's the moisture/humidity in the morning.
I have had (not what I would consider a problem) happen more than once, when setting the speed it takes quite a while to engage, sometimes 1/4 to 1/2 mile before it picks up.
I'm kind of like you, Scott, thinking that it's in the brake sensing circuit somewhere. |
Scott - I have a similar issue with the cc kicking in - as long as I'm operating the throttle, it won't kick in - when I let go of the throttle, the speed drops down a little, then the cc takes over.
If I can get to the switches, I'll make the other Scott dipswitch change. |
I just looked at both of my setups, one was on/off(low sensitivity, light vehicle w/high HP.) and the other was off/off(medium sensitivity)
I can't say as I could tell any real difference between the two.
I suppose someone could be daring and try off/on(high sensitivity, low power/heavy vehicles) and see how it performs.
Jim, just doing some fine print reading in the user guide:
After turning the system On, wait at least 3 seconds before attempting to set speed.
I have to admit that sometimes I go from the on, straight to the set button without waiting. _________________ Ride safe.
1995 K1100LT 0302044
2017 FLHTK Ultra Limited
Garmin StreetPilot 2820
Garmin Zumo 550
Garmin Zumo XT
"One who does not ask questions is ashamed to learn" Danish proverb
1997 K1100LT 0302488(R.I.P.)
1997 R1100RT ZC62149(sold)
Last edited by Scott_Anderson on Wed Jun 17, 2009 10:47 pm; edited 1 time in total |
|
| Back to top |
|
 |
Flying Duck PsyKotic Waterfowl

Joined: 27 Jan 2005 Posts: 10102 Location: Bumf***, WA
|
Posted: Wed Jun 17, 2009 10:44 pm Post subject: |
|
|
| Scott_Anderson wrote: |
I also tapped the wire going to the dash tach instead of the coil wire, as I was in the harnes wiring up my Fuel Plus anyway. |
Where did you tap into it? Near the cluster on in the relay box? _________________ 93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE |
|
| Back to top |
|
 |
Scott_Anderson Site Admin
Joined: 05 Sep 2006 Posts: 3122 Location: Central Iowa, USA
|
Posted: Wed Jun 17, 2009 10:51 pm Post subject: |
|
|
| Flying Duck wrote: | | Scott_Anderson wrote: |
I also tapped the wire going to the dash tach instead of the coil wire, as I was in the harnes wiring up my Fuel Plus anyway. |
Where did you tap into it? Near the cluster on in the relay box? |
Inside the plug cover on top of the Motronic.
I'll try and dig out my notes on it tomorrow if your interested. _________________ Ride safe.
1995 K1100LT 0302044
2017 FLHTK Ultra Limited
Garmin StreetPilot 2820
Garmin Zumo 550
Garmin Zumo XT
"One who does not ask questions is ashamed to learn" Danish proverb
1997 K1100LT 0302488(R.I.P.)
1997 R1100RT ZC62149(sold) |
|
| Back to top |
|
 |
Mystic Red Flying Brick Rider

Joined: 28 Mar 2005 Posts: 2330 Location: Twin Lakes Idaho
|
Posted: Wed Jun 17, 2009 11:00 pm Post subject: |
|
|
| Quote: | I just looked at both of my setups, one was on/off(low sensitivity, light vehicle w/high HP.) and the other was off/off(medium sensitivity)
I can't say as I could tell any real difference between the two. |
I use the big mph screen 2610 GPS and it tells the story. Also, when you hit the set button there is no wait or drop in speed, at least not nearly as much. I used to wonder if I made the connection and about 3 or 4 mph later the cruise would bite. Not now. _________________ Scott Hespelt, '94 K11LT
K11 OG #466 |
|
| Back to top |
|
 |
Jim Site Admin

Joined: 17 May 2003 Posts: 3841 Location: WHERETHEFUNNEVERENDS
|
Posted: Wed Jun 17, 2009 11:58 pm Post subject: Re: cruise control |
|
|
| Scott_Anderson wrote: |
Jim, just doing some fine print reading in the user guide:
After turning the system On, wait at least 3 seconds before attempting to set speed.
I have to admit that sometimes I go from the on, straight to the set button without waiting. |
Thank you, Scott for reading the fine print for me. If I can find those damn switches I'm going to see where they're set and try the other settings. _________________ Jim
1997 K1100LTSE 94,000 - still has gremlins!
1995 R100RT Classic 16,650 crashed - repaired!
1992 K75RTP 46,000
"We shall not all die, but we shall all be changed." |
|
| Back to top |
|
 |
Mystic Red Flying Brick Rider

Joined: 28 Mar 2005 Posts: 2330 Location: Twin Lakes Idaho
|
Posted: Thu Jun 18, 2009 9:48 pm Post subject: |
|
|
Jim, two screws on the front of the big honkin" unit take off the face plate. Then get out your magnifying glasses and flip away. _________________ Scott Hespelt, '94 K11LT
K11 OG #466 |
|
| Back to top |
|
 |
Jim Site Admin

Joined: 17 May 2003 Posts: 3841 Location: WHERETHEFUNNEVERENDS
|
Posted: Thu Jun 18, 2009 9:56 pm Post subject: |
|
|
Thank you, Scott. _________________ Jim
1997 K1100LTSE 94,000 - still has gremlins!
1995 R100RT Classic 16,650 crashed - repaired!
1992 K75RTP 46,000
"We shall not all die, but we shall all be changed." |
|
| Back to top |
|
 |
Scott_Anderson Site Admin
Joined: 05 Sep 2006 Posts: 3122 Location: Central Iowa, USA
|
Posted: Thu Jul 30, 2009 6:32 pm Post subject: |
|
|
Well I found my problem with slow engagement/responce.
Pulled the vac line off the cc unit and put a guage on it, 0-5" vac MAX.
Started to snoop and found the check valve was cracked on one side and leaking.
Replaced it and vac checked again, 15"+.
Road tested ran like new. Practically instant on, maintain speed within 2mph. _________________ Ride safe.
1995 K1100LT 0302044
2017 FLHTK Ultra Limited
Garmin StreetPilot 2820
Garmin Zumo 550
Garmin Zumo XT
"One who does not ask questions is ashamed to learn" Danish proverb
1997 K1100LT 0302488(R.I.P.)
1997 R1100RT ZC62149(sold) |
|
| Back to top |
|
 |
Stoked Steve Flying Brick Rider

Joined: 01 Sep 2004 Posts: 1402 Location: Virginia Beach, VA
|
Posted: Thu Jul 30, 2009 7:10 pm Post subject: |
|
|
Sweet, always nice to find a simple solution to a problem! _________________ Steve
Virginia Beach, VA
93 K1100RS Mystic Red SOLD
12 Suzuki DL650A VStrom |
|
| Back to top |
|
 |
|