| View previous topic :: View next topic |
| Author |
Message |
Flying Duck PsyKotic Waterfowl

Joined: 27 Jan 2005 Posts: 10102 Location: Bumf***, WA
|
|
| Back to top |
|
 |
yhog Mad Brick Rider

Joined: 16 Oct 2004 Posts: 84 Location: Tokyo, JAPAN
|
Posted: Tue Sep 02, 2008 12:57 am Post subject: I eat this ! |
|
|
Hi Flying Duck,
This is good idea ! This is what I searched  |
|
| Back to top |
|
 |
yhog Mad Brick Rider

Joined: 16 Oct 2004 Posts: 84 Location: Tokyo, JAPAN
|
Posted: Tue Sep 02, 2008 2:42 am Post subject: shop |
|
|
I accessed this site but unfortunately they can not ship out side of US Any body knows the shop who deal same conector and can ship to Japan ? |
|
| Back to top |
|
 |
Flying Duck PsyKotic Waterfowl

Joined: 27 Jan 2005 Posts: 10102 Location: Bumf***, WA
|
Posted: Wed Sep 03, 2008 9:53 pm Post subject: |
|
|
Contact Jim Davis at http://www.easternbeaver.com/Main/Elec__Products/Powerlet/Tankbag_SAE/tankbag_sae.html
He lives in Japan so I'm sure he'd ship to you since he ships all over the world.
He sells the Powerlet version of the same thing but it has a mounting ring and hardware and costs a bit more. _________________ 93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE |
|
| Back to top |
|
 |
yhog Mad Brick Rider

Joined: 16 Oct 2004 Posts: 84 Location: Tokyo, JAPAN
|
Posted: Thu Sep 04, 2008 1:32 am Post subject: Thanks ! |
|
|
Thanks Flying Duck
I will contact him. |
|
| Back to top |
|
 |
Flying Duck PsyKotic Waterfowl

Joined: 27 Jan 2005 Posts: 10102 Location: Bumf***, WA
|
Posted: Mon Sep 15, 2008 4:05 pm Post subject: |
|
|
Wired my bag this morning.
Took the outlet to the hardware store and found a stainless washer that has the perfect inside and outside diameters to put on the inside of the bag. Then drilled some holes in it and trimmed it down. Since one of my main reason for doing this is to run a radar detector in my tank bag, I installed it in the top section since I want the RD as high as possible to see over the instrument cluster. I put it on the front left since I'll be using the Powerlet socket in the dash pad.
Hardware:
 _________________ 93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE |
|
| Back to top |
|
 |
Jim Site Admin

Joined: 17 May 2003 Posts: 3841 Location: WHERETHEFUNNEVERENDS
|
Posted: Tue Sep 16, 2008 12:42 am Post subject: electric bag |
|
|
good job, Drake. I just tried to score an electrified bag off IBMWR.org - sent the guy a couple emails, finally heard back from his daughter that he's in hospital. Either someone else beat me to it, or he didn't make it...
Guess I'll have to try your setup. _________________ Jim
1997 K1100LTSE 94,000 - still has gremlins!
1995 R100RT Classic 16,650 crashed - repaired!
1992 K75RTP 46,000
"We shall not all die, but we shall all be changed." |
|
| Back to top |
|
 |
Flying Duck PsyKotic Waterfowl

Joined: 27 Jan 2005 Posts: 10102 Location: Bumf***, WA
|
Posted: Tue Sep 16, 2008 12:58 am Post subject: |
|
|
That's Bob Novarino. He's out of the hospital now. (Back problems.) Drop him another email and tell him you're my bud. _________________ 93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE |
|
| Back to top |
|
 |
|