| View previous topic :: View next topic |
| Author |
Message |
dave n Flying Brick Rider
Joined: 13 Dec 2003 Posts: 316 Location: Gastonia NC
|
Posted: Sat Apr 26, 2008 10:35 pm Post subject: REMUS exhaust for sale $250.00 |
|
|
K1; 4 valve K100; K1100LT & K1100RS Remus ex. sys.
Header section good condition - no dents/cracks/scrapes. Note perforated core inside header. Muffler has the same lining. The bolt at the 2 o'clock position was where previous owner had an EGT probe. I plugged with s/steel bolt, washer and nut. Bracket at bottom uses stock muffler rubber pad for stands to nest in. Has O2 sensor threaded hole.
Muffler is straight thru type with perforated lining. Note dent in side. Louder than stock but not obnoxious. Muffler clears both types of bags.
You will need 4 ex gaskets and I recomend replacing the rubber hanger grommet behind L pass. foot peg. $2.00 p# 18 21 1 461 922
$250.00 INCLUDES shipping to lower 48 states.
e-mail only please
 _________________ Dave Norris KOG 248
1999 Cagiva Gran Canyon
1993 K1100LT w/Hannigan sidecar
2008 Suzuki DR650
Last edited by dave n on Sun Jun 01, 2008 5:34 pm; edited 1 time in total |
|
| Back to top |
|
 |
Off the grid Chaotic Good

Joined: 05 Jul 2006 Posts: 3414 Location: At the local taco truck waiting for Jo.
|
Posted: Sat Apr 26, 2008 11:26 pm Post subject: |
|
|
If I wasn't up to my ass in bills and just purchasing my wife a new car after hers went tits-up I would be all over this.
Any chance you could hold it a month? I've been looking for one for almost a year now.  _________________ Bane of your existence since July 2006
2007 Triumph Tiger ABS. "Sabertooth"
2009 Husqvarna TE610. "The dirty Italian mistress"
 |
|
| Back to top |
|
 |
mnb Flying Brick Rider

Joined: 20 Jun 2007 Posts: 660 Location: San Jose, CA
|
Posted: Sun Apr 27, 2008 12:31 am Post subject: |
|
|
Wow, you had a car with tits? _________________ M N B
1997 BMW K1100LT ABS Special Edition
2003 Husqvarna TE610e
2007 Harley Davidson Road King
2009 BMW F800GS
2011 Husqvarna TE310
2014 Ducati Multistrada Pikes Peak MNB Edition |
|
| Back to top |
|
 |
owrstrich Flying Brick Rider

Joined: 29 Oct 2006 Posts: 2566 Location: CheezConsin
|
Posted: Sun Apr 27, 2008 12:36 am Post subject: |
|
|
indycars dont start sounding good until they hit 10,000 rpm... unless you are talking about the hotel tropicana novi...
The Hotel Tropicana Special Novi driven by Bobby Unser during qualifying for the 1963 Indianapolis 500...
listen here...
http://www.milleroffy.com/novi.wav
now otg... return the car and get her a k75 and use the difference for the muffler and a squatch snatch... 2 of them...
johnny _________________ yeeeeeehaaaaaaa... |
|
| Back to top |
|
 |
BlackHoof Flying Brick Rider
Joined: 12 Nov 2006 Posts: 302 Location: Near Duluth, Mn.
|
Posted: Sun Apr 27, 2008 7:17 am Post subject: |
|
|
That's less than I'd sell mine for...
That said, most of the time I enjoy the noise, unless I'm running
the hard bags. For some reason, the left bag & pipe set up an
annoying reasonance that makes having the pipe on most annoying.
But, it just may be me.
Good luck with your sale.
Dave, your Bush check is in the mail... _________________ Kent
'93 K1100LT- Blurple Colored
Lucky # 887
'27 Bugatti Replica/Kit Car-Dark Purple
'05 Suzuki Brugman/Russell Seat... |
|
| Back to top |
|
 |
dave n Flying Brick Rider
Joined: 13 Dec 2003 Posts: 316 Location: Gastonia NC
|
Posted: Sun Jun 01, 2008 8:26 pm Post subject: REMUS still available |
|
|
With all the exhaust system chatter recently some one needs to buy this one. _________________ Dave Norris KOG 248
1999 Cagiva Gran Canyon
1993 K1100LT w/Hannigan sidecar
2008 Suzuki DR650 |
|
| Back to top |
|
 |
rydor Flying Brick Rider
Joined: 16 Nov 2006 Posts: 1304 Location: Southern Illinois, U.S.A.
|
Posted: Tue Jun 10, 2008 5:37 pm Post subject: |
|
|
Thanks , Dave
Installation was a snap, although I had to have an aluminum tab fabricated to mount the silencer to the footpeg assembly. The bike sounds GREAT! Nice to have the bark equal the bite finally!
The dent is barely noticable... although it will look better with the silencer's center section powder coated black... soon...
 |
|
| Back to top |
|
 |
Flying Duck PsyKotic Waterfowl

Joined: 27 Jan 2005 Posts: 10102 Location: Bumf***, WA
|
Posted: Tue Jun 10, 2008 5:57 pm Post subject: |
|
|
Given the heat involved powder coating is probably not advisable. Ceramic coating will endure the heat much better and be more durable. It only cost me $50 to have my Staintune can done. ($120 for the headers so I didn't bother.)
 _________________ 93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE
Last edited by Flying Duck on Tue Jun 10, 2008 5:58 pm; edited 1 time in total |
|
| Back to top |
|
 |
Off the grid Chaotic Good

Joined: 05 Jul 2006 Posts: 3414 Location: At the local taco truck waiting for Jo.
|
Posted: Tue Jun 10, 2008 5:57 pm Post subject: |
|
|
Man I am more jealous than the prom queen runner up.
I am glad we kept in in the family however, nice score Rydor! _________________ Bane of your existence since July 2006
2007 Triumph Tiger ABS. "Sabertooth"
2009 Husqvarna TE610. "The dirty Italian mistress"
 |
|
| Back to top |
|
 |
Roy S. Flying Brick Rider

Joined: 05 Mar 2008 Posts: 1349 Location: W. Sacramento, California
|
Posted: Tue Jun 10, 2008 6:41 pm Post subject: |
|
|
My wife calls this Bike Jewelry. _________________ 1993 K1100LT/On going project
1990 K75rt
1991 K75s
LURKER at LARGE |
|
| Back to top |
|
 |
|