| View previous topic :: View next topic |
| Author |
Message |
mguzziridr
Joined: 21 May 2011
Posts: 9
Location: Lowell, NC
|
 Posted: Mon Aug 12, 2013 7:21 pm Post subject: Spark plug wire set suggestions |
 |
|
I have read the previous post (well some of them) regarding aftermarket spark plug wire sets and thought it appropriate to ask if anyone has current suggestions on what and where to buy these. Thank you for helping..
Steve
1994 K1100RS |
|
| Back to top |
|
 |
Stoked Steve
Flying Brick Rider
Joined: 01 Sep 2004
Posts: 1402
Location: Virginia Beach, VA
|
| Posted: Mon Aug 12, 2013 7:30 pm Post subject: |
|
|
I bought a real nice set from these guys a few years back, along with a rear shock.
Good stuff.
http://www.realmengineering.com/page12.html
_________________
Steve
Virginia Beach, VA
93 K1100RS Mystic Red SOLD
12 Suzuki DL650A VStrom |
|
| Back to top |
|
|
mguzziridr
Joined: 21 May 2011
Posts: 9
Location: Lowell, NC
|
| Posted: Mon Aug 12, 2013 7:55 pm Post subject: |
|
|
I saw your photo before and was curious if these were still available. I will look into them. Thanks.
Last edited by mguzziridr on Mon Aug 12, 2013 8:49 pm; edited 1 time in total |
|
| Back to top |
|
|
Stoked Steve
Flying Brick Rider
Joined: 01 Sep 2004
Posts: 1402
Location: Virginia Beach, VA
|
| Posted: Mon Aug 12, 2013 8:40 pm Post subject: |
|
|
The shipping and customs add a bit to the price, but they are nicely designed, and unlike the OEM ones, you don't need a winch to pull them off!
_________________
Steve
Virginia Beach, VA
93 K1100RS Mystic Red SOLD
12 Suzuki DL650A VStrom |
|
| Back to top |
|
|
michaelcurrin
Flying Brick Rider
Joined: 01 Jun 2003
Posts: 329
Location: eastern NC
|
| Posted: Tue Aug 20, 2013 10:49 am Post subject: |
|
|
I just installed some Magnecor wires I bought on Amazon, seem to be good quality, and about half the price as on the Magnecor site. ( I did use the Magnecor site to get the part number.)
_________________
Mike Currin
20 BMW R1250RS
93 BMW K1100RS / EML Speed 2000
06 Ducati ST3
67 Triumph 650 chopper |
|
| Back to top |
|
|
mguzziridr
Joined: 21 May 2011
Posts: 9
Location: Lowell, NC
|
| Posted: Wed Aug 21, 2013 4:39 pm Post subject: |
|
|
| michaelcurrin wrote: | | I just installed some Magnecor wires I bought on Amazon, seem to be good quality, and about half the price as on the Magnecor site. ( I did use the Magnecor site to get the part number.) |
Wow. Great price at Amazon. I never thought of checking there! Good deal for you.
Steve |
|
| Back to top |
|
|
N41EF
Flying Brick Rider
Joined: 23 Mar 2014
Posts: 406
Location: Aiken, SC
|
| Posted: Sun Aug 16, 2015 8:26 pm Post subject: |
|
|
I just installed a set of Magnacor 8mm wire in blue. Used the manufacturs web site to get the part number, then eBay and Amazon to get prices. Found a set on eBay with free shipping, waited till they were "on sale" and bought them. My wires were original with right at 17k miles on them, but they had been squished where someone put a tie wrap on them to make a bundle. It was tight getting the 8mm wires through the hole at the back of the head. 8.5mm wires would be really tight.
They are exact length as originals. Great fit, obviously makes the bike go much faster.
_________________
2014 R1200RT Water Cooled
2001 R1100S Light
1993 K1100LT. Nissan Ice Blue.(Gone) |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
