| View previous topic :: View next topic |
| Author |
Message |
hfxrzw
Mad Brick Rider
Joined: 30 Jan 2009
Posts: 78
|
 Posted: Sun Apr 04, 2010 1:36 pm Post subject: Brembo F08 caliper bolt torque |
 |
|
Team, I bought the repair kit from Brembo to renew the seals of the brake callipers, cleand them, separated them, renewed all, but got stiuck as the Brembo documentation doesn't state the torque for the calliper halves bolts. Has anybody got an idea or a link? Thanks, Rene.
_________________
Cheers, Rene
Greetings from Florida.
BMW K100 '85 |
|
| Back to top |
|
 |
blue95lt
Flying Brick Rider
Joined: 21 Mar 2007
Posts: 230
Location: Franklin In.
|
| Posted: Sun Apr 04, 2010 5:05 pm Post subject: torque values |
|
|
Hi Rene,
Im keith, Not sure what an fo8 is but in the clymer bmw manual on page #647 in chap. 14(1990 and later model supplement)cause Ihave a 1995 k11lt,it shows ft. caliper mtng bolts outer 2 bolts5-10 N.m/3.6-7.4ft.lbs. and inner 2 bolts25-35 N.m/18.4-25.8 ft.lbs.
I do have brembo calipers on my flying brick also,and the manual is for 1985 to 1995 k-series bikes.
Hope this helps and maybe some more knowledgeable folks will be along shortly to help and chime in? ( blue95lt)
_________________
1995 k1100lt daily ride(22953)when I got it
1982 cb650sc blue nighthawk (38000)(crashed)
1974 kz400(sold to get nighthawk) |
|
| Back to top |
|
|
hfxrzw
Mad Brick Rider
Joined: 30 Jan 2009
Posts: 78
|
| Posted: Thu Apr 08, 2010 1:37 pm Post subject: |
|
|
Thanks Keith, well appreciated!!
I think your info is for the 4 piston calipers. Mine only have two pistons and two bolts, but I guess, from your info that using 30 Nm should be OK.
Thanks, Rene.
_________________
Cheers, Rene
Greetings from Florida.
BMW K100 '85 |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
