| View previous topic :: View next topic |
| Author |
Message |
WVMSFKRS Mad Brick Rider
Joined: 24 Nov 2007 Posts: 122 Location: Fairmont, WV
|
Posted: Fri Feb 06, 2009 10:33 pm Post subject: Stripped spring retainer |
|
|
Does anybody have an easy fix for this. The book said 20Nm, I never made it. I'm thinking of tapping it out to a 13 or 14, but not sure how I would seal it.
 _________________ IBA#42211
MSF Rider Coach
Riders Edge Instructor
'09 K1200LT
'07 K1200GT Traded
'96 K1100 RS SE *SOLD*
'05 HD Ultra 82,000+ miles
'04 URAL *SOLD* |
|
| Back to top |
|
 |
Jim Site Admin

Joined: 17 May 2003 Posts: 3841 Location: WHERETHEFUNNEVERENDS
|
Posted: Fri Feb 06, 2009 11:48 pm Post subject: |
|
|
check with the parts recyclers - http://www.k11og.org/forum/viewtopic.php?t=4258 You should be able to pick up a good used one - be less hassle than tapping it. _________________ Jim
1997 K1100LTSE 94,000 - still has gremlins!
1995 R100RT Classic 16,650 crashed - repaired!
1992 K75RTP 46,000
"We shall not all die, but we shall all be changed." |
|
| Back to top |
|
 |
Scott_Anderson Site Admin
Joined: 05 Sep 2006 Posts: 3128 Location: Central Iowa, USA
|
Posted: Sat Feb 07, 2009 12:17 am Post subject: Re: Stripped spring retainer |
|
|
| WVMSFKRS wrote: | Does anybody have an easy fix for this. The book said 20Nm, I never made it. I'm thinking of tapping it out to a 13 or 14, but not sure how I would seal it.
 |
Ya know, I just posted about something like this the other day. I ordered the new fill plug seal rings and they won't fit my plugs. The rings are 12mm and my plugs are 14mm, not the 12mm as spec'd in the parts listings. _________________ Ride safe.
1997 K1100LT 0302488
2017 FLHTK Ultra Limited
Garmin StreetPilot 2820
Garmin Zumo 550
Garmin Zumo XT
"One who does not ask questions is ashamed to learn" Danish proverb
1995 K1100LT 0302044(R.I.P.)
1997 R1100RT ZC62149(sold) |
|
| Back to top |
|
 |
RAL88 Flying Brick Rider

Joined: 28 Apr 2004 Posts: 736 Location: New Mexico Land of Enchantment and 365 days of riding USA
|
Posted: Sat Feb 07, 2009 9:07 am Post subject: |
|
|
My fill plugs stripped out and what I ended up doing is putting two seal rings on each plug and this fixed the problem. It seemed to raise the plug a little higher in the threads and it was able to get a better bite on the threads. If you look at the plugs the area by the head does not have threads and when I screwed it in this smooth area went into part of the threaded area and caused it to not bite as well. Take the ring from one side and put it on the other so you have two on that side and see if it helps. _________________ Rich
"If it ain't broke, take it apart and make it work better"
*************
'96' K1100LT-SE
'97' R850GS-R |
|
| Back to top |
|
 |
Shoganai Biscuit Fluffer

Joined: 27 Apr 2005 Posts: 2234 Location: Culpeper,VA
|
Posted: Sun Feb 08, 2009 5:12 am Post subject: Re: Stripped spring retainer |
|
|
| WVMSFKRS wrote: | Does anybody have an easy fix for this. The book said 20Nm, I never made it. I'm thinking of tapping it out to a 13 or 14, but not sure how I would seal it.
 |
Like I posted in Scott's thread, just replace it. New or used, it's just not worth the effort to try to salvage it.
New here:
http://www.maxbmwmotorcycles.com/fiche/MainDiagrams.asp?mospid=47928 _________________ 1993 K1100RS aka The Shop Whore
1994 K1100RS aka Blue Streak
The long road is a rainbow and the pot of gold lies there.
So slip the chain and I'm off again,
You'll find me everywhere. I'm a Rover. - JT
Nana korobi ya oki |
|
| Back to top |
|
 |
|