K11 Owners Group

Gomedic · Posted: Mon May 05, 2008 11:02 pm Post subject: ABS light show

Ok, I have read the threads on the ABS. I have a 97 LT. My ABS may start to alternate, then the right is bright and the left is a bit dimmer, but they stay on continuously. Once in awhile, they will alternate again, then go back to solids...I replaced the relay last fall. What else should I look for? Is it bad wiring?

And the ABS definitely DOES NOT work....

Glenn
_________________
1997 K1100LT Mine...ALL MINE!

Scott_Anderson · Posted: Mon May 05, 2008 11:11 pm Post subject:

My first thought would be to check the connector at the back of the instrument pod.
Second thought would be to check for any ABS fault codes/reset system.

Ride Safe

Scott

Gomedic · Posted: Mon May 05, 2008 11:22 pm Post subject:

I have tried the "reset" trick several times...no sucess. I don't even get fault codes. I will check the connector tomorrow...
_________________
1997 K1100LT Mine...ALL MINE!

Scott_Anderson · Posted: Mon May 05, 2008 11:27 pm Post subject:

Third I'd check the connector at the ABS module itself, pull it and reseat it.

Chassis ground connections? Clean, not broken.

Just ideas. Smile

Scott

bmwmick · Posted: Tue May 06, 2008 9:54 am Post subject:

Gomedic · Posted: Tue May 06, 2008 3:17 pm Post subject:

Yes I am using a 12v led. When the lights are alternating, I hit the abs switch and the light goes solid (like it should). THen for some reason, the left gets bright and solid and right get dim and solid! aaarrrrggghhhh

Glenn
_________________
1997 K1100LT Mine...ALL MINE!