K11 Owners Group

[Off the grid]

At the boot by the lever.

Please tell me it's something cheap. Like MAX a rebuild kit.



01 34312310867 brake master cylinder (D=12MM MAGURA) - Up to 07/1993 BUY 1 $170.00
01 34311458142 brake master cylinder (D=12MM MAGURA) - 07/1993 and above BUY 1 $140.00
02 34311451985 fillister-head screw (M6X16) BUY 2 $0.90
03 34321242205 hollow bolt - Up to 07/1993 BUY 4 $2.80
04 07119963072 gasket ring (A10X13,5-CU) - Up to 07/1993 BUY 8 $0.50
05 34322311325 brake hose - Up to 07/1993 BUY 1 $34.00
06 34322311324 brake hose - Up to 07/1993 BUY 1 $55.00
07 17111460922Click to see notes hose clamp (D=12,3MM) BUY 1 $1.90
08 34321457880 hose BUY 1 $5.00
12 34312311064 repair kit brake master cylinder (D=12MM MAGURA) BUY 1 $68.00
13 34311454435 rubber boot (MAGURA) BUY 1 $6.00
14 34311451885 adjuster (MAGURA) BUY 1 $7.00
_________________
Bane of your existence since July 2006
2007 Triumph Tiger ABS. "Sabertooth"
2009 Husqvarna TE610. "The dirty Italian mistress"

[Flying Duck]

Take it off the bike.

Remove the little set screw on the side to get the piston out.

IF it's not visibly pitted and the seals on the piston still look ok, then wipe off the seals and clean the bore out with 0000 grade steel wool.

Then reinstall it.

This can work - Iv'e done it a few times with good results.
_________________
93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE

[mnb]

Heh, that just started happening to me a week or so ago...
_________________
M N B
1997 BMW K1100LT ABS Special Edition
2003 Husqvarna TE610e
2007 Harley Davidson Road King
2009 BMW F800GS
2011 Husqvarna TE310
2014 Ducati Multistrada Pikes Peak MNB Edition

[Off the grid]

Thanks Drake, will give it a try.
_________________
Bane of your existence since July 2006
2007 Triumph Tiger ABS. "Sabertooth"
2009 Husqvarna TE610. "The dirty Italian mistress"