| View previous topic :: View next topic |
| Author |
Message |
Moondog
Flying Brick Rider
Joined: 09 Oct 2004
Posts: 670
Location: Richmond Hill, Georgia
|
 Posted: Tue Mar 25, 2008 9:16 pm Post subject: Motronic connector |
 |
|
Has anyone tried using the connector diagram that Mr. Warner has drawn in the Motronic sticky thread? I tried using it and found that my connector does not jive with the diagram i.e. missing recepticles. Has anyone had that connector apart? The bike runs and starts etc. It seems to me to be a limited diagram by years or maybe for the K100. Any thoughts good people?
_________________
"Badges? We don't need no stinking badges"!
I like the social aspect of riding. Rally's, socializing, drinking beer, fartin' and carrying on. 
2004 R1150RS
1996 K1100RS (moved on to new home) |
|
| Back to top |
|
 |
Daniël V
Mad Brick Rider
Joined: 16 Jan 2006
Posts: 116
Location: Leiden, the Netherlands
|
| Posted: Wed Mar 26, 2008 5:11 am Post subject: |
|
|
mr the dog,
The connector, drawn by mr Warnes is correct for pre 93 bikes. Somewhere in 93 a change was made in the K1100 series. the post 93 models have a lot of different wiring, including the connector. another nice example is de sidestandswitch wiring, which is positive pre 93 and ground post 93. but I digress.
If you need the pinout for the newer bikes let me know, I have a BMW motronic guide, which includes the pinouts. unfortunatly, its in german.
HTH, Daniel |
|
| Back to top |
|
|
max
Flying Brick Rider
Joined: 22 Aug 2005
Posts: 309
Location: NZ
|
| Posted: Thu Mar 27, 2008 5:55 am Post subject: |
|
|
Daniel - I'd be interested in anything you've got; there isn't that much available on the later Motronic 2.2 that I've found, and even wading through the German might be worth it!!
Cheers
Max |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
