| View previous topic :: View next topic |
| Author |
Message |
Matt Brick Rider
Joined: 01 Mar 2008 Posts: 27 Location: Augusta, GA
|
Posted: Fri Mar 14, 2008 9:33 pm Post subject: Power socket used for battery tender? |
|
|
I took voltage readings with the ignition off on the three power sockets, and I only see battery voltage in the socket next to the key ignition switch. I couldn't find any voltage in the socket under the radio or in the socket on the left side by the coils with ignition off. Is this correct? Just wanting to make sure.
Matt |
|
| Back to top |
|
 |
Mystic Red Flying Brick Rider

Joined: 28 Mar 2005 Posts: 2330 Location: Twin Lakes Idaho
|
Posted: Sat Mar 15, 2008 1:16 pm Post subject: |
|
|
Matt, I have power to the one by the key and power to the one on the left side. I believe you should have power to all (they are hot all the time) including the cig lighter with the key off. Do they power up with the key on? _________________ Scott Hespelt, '94 K11LT
K11 OG #466 |
|
| Back to top |
|
 |
Flying Duck PsyKotic Waterfowl

Joined: 27 Jan 2005 Posts: 10102 Location: Bumf***, WA
|
Posted: Sat Mar 15, 2008 1:21 pm Post subject: |
|
|
FWIW: I can charge either of my K11s at the coils with the key off. _________________ 93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE |
|
| Back to top |
|
 |
Matt Brick Rider
Joined: 01 Mar 2008 Posts: 27 Location: Augusta, GA
|
Posted: Wed Mar 19, 2008 4:16 pm Post subject: |
|
|
I tried again, and I now can get voltage at all 3 sockets without ignition on. Thanks
Matt |
|
| Back to top |
|
 |
|