View previous topic :: View next topic |
Author |
Message |
Al. Flying Brick Rider
Joined: 28 Oct 2005 Posts: 383 Location: West of Ireland
|
Posted: Thu Sep 28, 2023 5:58 am Post subject: Final drive AGAIN |
|
|
Had leak there and replaced seal.
Leaked again.
Just in case I got it wrong replaced the seal.
Leaking again.
Thinkin of polishing the "shaft" with very fine
emery paper in case there is a roughness there.
Any ideas why it's happening?? _________________ 1994 K1100 LTSE + Blackbird |
|
Back to top |
|
|
Scott_Anderson Site Admin
Joined: 05 Sep 2006 Posts: 3120 Location: Central Iowa, USA
|
Posted: Thu Sep 28, 2023 6:58 pm Post subject: |
|
|
My guess for multiple seal leaks would be worn bearings, just enough that the seal isn't mating properly on the shaft surface. _________________ Ride safe.
1995 K1100LT 0302044
1997 R1100RT ZC62149
2017 FLHTK Ultra Limited
Garmin StreetPilot 2820
Garmin Zumo 550
Garmin Zumo XT
"One who does not ask questions is ashamed to learn" Danish proverb
1997 K1100LT 0302488(R.I.P.) |
|
Back to top |
|
|
Al. Flying Brick Rider
Joined: 28 Oct 2005 Posts: 383 Location: West of Ireland
|
Posted: Thu Sep 28, 2023 7:28 pm Post subject: |
|
|
95,000 miles up
Thanks _________________ 1994 K1100 LTSE + Blackbird |
|
Back to top |
|
|
Grunter Flying Brick Rider
Joined: 30 Sep 2015 Posts: 369 Location: North East England
|
Posted: Sat Sep 30, 2023 4:10 am Post subject: |
|
|
I had to replace the same seal on my '96 K1100 and because I did not know how to do it I took it to my nearest BMW dealer to have it done. It was well worth it because the seal had been replaced before (before my ownership) but the person who did it previously had made a complete hash of the job and they had a somewhat awkward task because they could not get the old seal out because it had been butchered when being fitted! _________________ 1997 K1100LT
1994 R1100RS |
|
Back to top |
|
|
Al. Flying Brick Rider
Joined: 28 Oct 2005 Posts: 383 Location: West of Ireland
|
Posted: Tue Oct 10, 2023 3:43 pm Post subject: |
|
|
Seems the bearing is shot.
Took it for a fast run to get it hot.
Checked the wheel and I could feel the rattle. _________________ 1994 K1100 LTSE + Blackbird |
|
Back to top |
|
|
Al. Flying Brick Rider
Joined: 28 Oct 2005 Posts: 383 Location: West of Ireland
|
Posted: Wed Jan 31, 2024 5:41 pm Post subject: |
|
|
Got it fixed.
See post on speedo issue........ _________________ 1994 K1100 LTSE + Blackbird |
|
Back to top |
|
|
|