| View previous topic :: View next topic |
| Author |
Message |
zisco
Joined: 02 Oct 2020
Posts: 8
Location: Germany, Italy
|
 Posted: Fri Oct 16, 2020 3:53 am Post subject: clutch pushrod does not want to go out |
 |
|
Hi all, I´m not having found an answer with search button, so I open a new post.
I am intent on disassembling the clutch to check its for wear, but I cannot remove the pushrod .....
Reading a guide on "how to change the clutch" it is reported that this is enough pull to remove it, but mine does not come off....
What am I doing wrong?
https://imgur.com/a/GMcenxU
Another question, in this photo if you look at the output shaft of the gear, you will see that there is oil, it is normal or is the gasket faulty?
Thanks to all
Francesco
_________________
BMW K100 RS 16v 90´ |
|
| Back to top |
|
 |
Flying Duck
PsyKotic Waterfowl
Joined: 27 Jan 2005
Posts: 10087
Location: Bumf***, WA
|
| Posted: Sun Oct 18, 2020 8:21 pm Post subject: |
|
|
The front end of the pushrod is probably stuck in the clutch spring. (Not uncommon.) It does not HAVE to be removed in order to pull the transmission. Just pull the transmission without pulling the pushrod first.
_________________
93 LT (x2)
94 RS
86-97 K75F(K75/100/1100 Frankenbrick)
86 K75C w/paralever, hi perf cams,TURBO!
91 & 92 K75Ss
91 K1
86 custom K100
14 WR250R
IBA #17739 (SS1K, BBG, 50CC)
Buy parts HERE
Last edited by Flying Duck on Fri Mar 19, 2021 12:11 am; edited 1 time in total |
|
| Back to top |
|
|
zisco
Joined: 02 Oct 2020
Posts: 8
Location: Germany, Italy
|
| Posted: Mon Oct 19, 2020 2:51 am Post subject: |
|
|
Ok I will try, thanks
_________________
BMW K100 RS 16v 90´ |
|
| Back to top |
|
|
Acentistaha
Brick Rider
Joined: 28 Sep 2017
Posts: 48
|
| Posted: Wed Mar 17, 2021 11:08 pm Post subject: |
|
|
| I'd appreciate if you have updates. Been experiencing this at the moment. |
|
| Back to top |
|
|
zisco
Joined: 02 Oct 2020
Posts: 8
Location: Germany, Italy
|
| Posted: Thu Mar 18, 2021 4:54 am Post subject: |
|
|
| Acentistaha wrote: | | I'd appreciate if you have updates. Been experiencing this at the moment. |
as said flying duck, the push rod was simply stuck, when I removed the gearbox it came off together… bye
_________________
BMW K100 RS 16v 90´ |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
