| View previous topic :: View next topic |
| Author |
Message |
Jan E-28
Brick Rider
Joined: 18 Jun 2018
Posts: 26
Location: Norway
|
 Posted: Fri Oct 25, 2019 6:20 pm Post subject: Any users of the SXtune software or Delta EFI system? |
 |
|
I did not order the bradband lambda with the kit. And manuals/instructions dont mention much about it. Asked both BSK and SCS-Delta and both just refered to the lambda and controller they sell.
A co-worker is seasoned in the EFI tuning and had a look in the SXtune program for the Delta400 set up. And to him it looks like it could be set up to use a variety of lambda sensors. And that it offers both lambda scaling and heating output? Maybe not the LSU4.9 directly but at least LSU4.2.
Anyone in here knows the setup and what will work?
_________________
K1100rs -96
K100rt -85
K100lt -87 |
|
| Back to top |
|
 |
Jan E-28
Brick Rider
Joined: 18 Jun 2018
Posts: 26
Location: Norway
|
| Posted: Thu Nov 07, 2019 5:07 pm Post subject: |
|
|
I just go for gut feeling that the EMS works with any aftermarked sensor that gives out linear 0-5v.
I went for the AEM X-series controller 30-0310 and the 30-0312 can-bus gauge.
This comes already calibrated and the gauge can be removed after set up and the controller still supply input to EMS.
Most lambda gauges has internal controller and then you have to find a place for it on the bike.
_________________
K1100rs -96
K100rt -85
K100lt -87 |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
