| View previous topic :: View next topic |
| Author |
Message |
Dave6172
Mad Brick Rider
Joined: 20 Jun 2013
Posts: 84
Location: Winston Salem, NC
|
 Posted: Sat Jul 23, 2016 5:19 pm Post subject: Brake light out 1997 K1100LT |
 |
|
| My brake light does not come on, either with the front or the rear brake levers. The bulb is good and the BMU, red triangle, stays on all of the time. Any ideas as to how to fix this problem? Thanks |
|
| Back to top |
|
 |
Scott_Anderson
Site Admin
Joined: 05 Sep 2006
Posts: 3122
Location: Central Iowa, USA
|
| Posted: Sat Jul 23, 2016 8:45 pm Post subject: |
|
|
Check fuse #1 and #2 Both fuses feed power to the BMU.
Circuit #1 also feeds power to the fuel gauge, temp gauge, and heated grips.
If the gauges and grips work, it sounds like you may have issues with the BMU internally.
_________________
Ride safe.
1995 K1100LT 0302044
2017 FLHTK Ultra Limited
Garmin StreetPilot 2820
Garmin Zumo 550
Garmin Zumo XT
"One who does not ask questions is ashamed to learn" Danish proverb
1997 K1100LT 0302488(R.I.P.)
1997 R1100RT ZC62149(sold) |
|
| Back to top |
|
|
Dave6172
Mad Brick Rider
Joined: 20 Jun 2013
Posts: 84
Location: Winston Salem, NC
|
| Posted: Sun Jul 24, 2016 10:57 am Post subject: |
|
|
| OK, here's what I found. Brake light wire pinched and cut through, fixed. Red triangle still on all the time, removed BMU per Duck's fine instructions, fixed. All is well again, now it's too damn hot to ride (97 deg. and humid). |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
