| View previous topic :: View next topic |
| Author |
Message |
atlantaboblutz@live.com
Big Brick Rider
Joined: 10 Nov 2011
Posts: 60
Location: Atlanta, Georgia
|
 Posted: Wed Nov 26, 2014 5:22 pm Post subject: Seat Question |
 |
|
Does any one know if the seat off a 1993 K75RT will fit my 1994 K1100LT? I have a line on a used Corbin from the K75 RT and if I swap all of the hinges with my current seat... I was wondering if it will work
I went to the Corbin website and it implies that it will work.
Thanks in advance for your help and Happy Thanksgiving to all those in the US.
_________________
Thanks,
Bob
Atlanta GA
'94 K1100 LT
'76 R75/6 |
|
| Back to top |
|
 |
Inge K.
Flying Brick Rider
Joined: 30 Apr 2011
Posts: 458
Location: Norway
|
| Posted: Wed Nov 26, 2014 8:11 pm Post subject: |
|
|
| You need the hinges from -93 or earlier model, on your -94 the hinges is thicker/higher because of the rubber damper. |
|
| Back to top |
|
|
atlantaboblutz@live.com
Big Brick Rider
Joined: 10 Nov 2011
Posts: 60
Location: Atlanta, Georgia
|
| Posted: Wed Nov 26, 2014 8:22 pm Post subject: |
|
|
So you're saying the seat pan is different and essentially sits on the frame?
_________________
Thanks,
Bob
Atlanta GA
'94 K1100 LT
'76 R75/6 |
|
| Back to top |
|
|
Inge K.
Flying Brick Rider
Joined: 30 Apr 2011
Posts: 458
Location: Norway
|
| Posted: Wed Nov 26, 2014 9:18 pm Post subject: |
|
|
Correct, the pan was changed on the LT at 03/93, K1100RS also have the later one.
K100's have all the earlier pan (from -86 on). |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
