View previous topic :: View next topic |
Author |
Message |
AUSBRICK Mad Brick Rider
Joined: 18 May 2007 Posts: 119 Location: MELBOURNE AUSTRALIA
|
Posted: Sun Mar 24, 2024 10:37 pm Post subject: T P S settings |
|
|
Hi all, been a long time, seems I have misplaced all my printed info . I used to set the tps via its output voltage but dont know the figures and wires to read anyone got that info . tried the search just going in circles,.. cheers AB _________________ 92k1100 lt with sidecar. 93K1100 CAFE..86K75C.95 k1100lt |
|
Back to top |
|
|
AUSBRICK Mad Brick Rider
Joined: 18 May 2007 Posts: 119 Location: MELBOURNE AUSTRALIA
|
Posted: Tue Mar 26, 2024 8:26 pm Post subject: Tps voltage check |
|
|
Seems this sites dead , always got a quick response, any way found all my
Info luckily for anyone that needs it it's pin #1& pin#4 on the tps plug , ignition on motor not running . Voltage should be 0.375 .if not rotate tps till as close as u can get snap throttle on and off several times to make sure it's tha same . This is my go to starting point setting and then I can make very small adjustments from there with motor running. Has always worked well . My wiring has been stripped down to the bare necessity as it's a cafe so no test light flashing to analyse. Cheers AB _________________ 92k1100 lt with sidecar. 93K1100 CAFE..86K75C.95 k1100lt |
|
Back to top |
|
|
Flying Duck PsyKotic Waterfowl
Joined: 27 Jan 2005 Posts: 10088 Location: Bumf***, WA
|
|
Back to top |
|
|
|