K11 Owners Group Forum Index K11 Owners Group
K11 Owners Group
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Head bolt torque sequence - 2 different in the manual?

 
Post new topic   Reply to topic    K11 Owners Group Forum Index -> Tech
View previous topic :: View next topic  
Author Message
Jan E-28
Brick Rider


Joined: 18 Jun 2018
Posts: 26
Location: Norway
PostPosted: Thu Jan 31, 2019 6:46 am    Post subject: Head bolt torque sequence - 2 different in the manual? Reply with quote
About to mount the head back on my K1100 -96. And in the shop manual it states two different methods. One is listed in the torque list in the beginning. And other is stated in the procedures for the fitment. But what is correct?

20Nm +75dgr +75dgr?
or
20NM+90dgr?

I did the 20NM+90dgr and by checking I see that equals to about 60Nm. If I am to take it 60dgr more, I guess I end up about 30% higher in Tq - at about 80-100Nm-or extra stretched bolts over the yield/elastic range and maybe close to the tensile point?

Tightening torque table page 00.3:
https://photos.app.goo.gl/ZtTKTai5M8aULUyy9

Installment Page 11.42:
https://photos.app.goo.gl/fxNzXpk3M4pCuReo7
_________________
K1100rs -96
K100rt -85
K100lt -87
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    K11 Owners Group Forum Index -> Tech All times are GMT - 4 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group