K11 Owners Group

slash2nut

A couple of weeks ago, I went out to my '93 KLT and noticed the windshield wouldn't adjust. I put a new fuse in and it worked fine. I drove off and the fuse blew again.

I put a 20 amp fuse in. Drove off and it blew again. Last night I put a 10 amp fuse in. I did not start the bike. The windshield worked for the evening. I drove to work today. Shortly after starting the bike and driving the fuse blew again.

So, the fuse only blows when I start the bike. I have a flawed electronic wiring diagram so I do not know what else is on that circuit (the last fuse in the block at the bottom) but everything seems to be working.

I was wondering if anyone might have any ideas or has had this issue.

Thanks
_________________
Dave in MI
'93 K11lt
'86 K75c

Off the grid · Posted: Fri Sep 12, 2008 5:02 pm Post subject:

Check the cig lighter.

They are the same fuse and frequently the cause of windshield woes.
_________________
Bane of your existence since July 2006
2007 Triumph Tiger ABS. "Sabertooth"
2009 Husqvarna TE610. "The dirty Italian mistress"

slash2nut · Posted: Fri Sep 12, 2008 6:07 pm Post subject:

Scott_Anderson · Posted: Fri Sep 12, 2008 6:27 pm Post subject:

It's online, and it's in Geman, but it's not that hard to figure out. Hover your mouse over the k1100 and you will get a dropdown list to select from. The bottom one is for heated grips and the next one up is for the windsreen. They are PDF and in color, with some digital pics as well.

http://www.cafezurburg.de/petergrans/Schaltplaene.htm

Good luck
_________________
Ride safe.

1997 K1100LT 0302488
2017 FLHTK Ultra Limited
Garmin StreetPilot 2820
Garmin Zumo 550
Garmin Zumo XT
"One who does not ask questions is ashamed to learn" Danish proverb
1995 K1100LT 0302044(R.I.P.)
1997 R1100RT ZC62149(sold)