K11 Owners Group

On my 91 K100LT I believe that the screw in the end of the bar pulls a wedge toward the outside that spreads and clamps the bar end. By loosening the bolt and then tapping the screw it will calapse t ...

I know there are different ways of mounting the bar end weights. What has worked for me is to loosen the center screw partly and lightly tap the end of the screw with a rubber hammer. This usually w ...

I've created a GPX file of the leg 1 bonus locations that can be found here.

http://www.poi-factory.com/node/49928

Let me know what you think. I will make a leg 2 bonus location GPX f ...

The stock operation of your signals is as you are describing after the service. If you have Run-N-Lites it could be as simple as your bulbs being bad. That would be the first thing to check. With R ...

I have three J & M headsets that I no longer need. Two of them have the upper and lower five pin cords and are $20 each plus shipping. The third headset will be only the headset and is $15 plus ...

If your old one lasted 8 years, I'd buy one just like it.

If a previous owner has installed running lights in the front blinkers you will have dual filament bulbs. If that is so you will need 1157 bulbs.

This Zumo 450/550 motorcycle mount has the security screw replaced with a aftermarket thumb screw. This makes it much easier to remove the Zumo from the cradle. I will be including the original secu ...

Zumo 550 auto suction mount, cable , and mounting disk. The auto suction mount sells for $98 by itself. I am including the power cable as well ($2 Cool

. I want $60 for everything which will include sh ...

Price lowered to $70.

My Zumo 550 no longer works so I am selling my GXM30. $80 which will include shipping in the continental US.

http://i1342.photobucket.com/albums/o778/kioolt/100_1357_zpsgr5pkhub.jpg

PM if inter ...

The OP said the starter solenoid clicked. What he really meant is that the starter relay clicked. The load shed relay WILL NOT keep the starter from working. The load shed relay will keep the lights ...

I really doubt that it is your starter. The starter on the early K's is very simple. It is nothing like a car starter. It is only a motor with a toothed shaft on it. It doesn't have a bendix like ...

What kind of tool does it take to remove the radio? The one in my bike seems kaput, I get a LCD number indication in the window when I turn it on but that's it, no response from any of the buttons. I' ...

A quick check with Radio Shack shows that they may not sell auto antennas any more. I did find one for a K1100LT on eBay now. Also you may want to check out this one on Amazon.com.

http://www.ama ...

Years ago I bought an antenna from Radio Shack to put on my 82 R100RT.

http://media-cache-ak0.pinimg.com/originals/df/dc/0a/dfdc0a3c02c3844f37e77437e00e8e46.jpg

Try looking at these web pages for information on resetting the ABSI.

http://www.ibmwr.org/ktech/abs-reset.shtml

http://www.ibmwr.org/ktech/abs-reset2.shtml

There are other pages for diagnost ...

There is a connector up from the speed sensor on the rear drive that could be causing your problem. My K100LT has done the same thing over the 23 years that I have owned it on occasion. Usually jus ...

It's not hard to do at all if you have the four digit code. I've heard that you can get the code if you have the serial number of the radio. Without the code you're out of luck.