K11 Owners Group

It is all a bolt on. You will need new upper side panels, new kneepads and some minor rubber insulation. There is the lower bracket that mounts the belly pan to the motor, that can come off. I think t ...

Those would be great. If anyone can do it...Shogs can. I was wondering how much damage would be sustained if I dropped my bike with Gwens HID mounts under the mirror. I am really not looking forward t ...

I let the fork drain all day. Aside from losing about 10 ml when the top plug was removed, I got all of it.

After the whole day, it dripped out 350 ml. Maybe it was overfilled a little??

I will ...

Ron, sorry I did not see you in Bloomsburg....

Thanks guys, no the forks were COMPLETELY disassembled. Each part was taken apart and cleaned.

I was thinking of draining that fork leg and seeing how much fluid comes out. I would assume 350ml (if ...

I put in 400 cc if I remember correctly...since they were torn down.

How do you measure the fluid level in a K1100RS. The K100RS is easy as you can use a dipstick, but with the K1100, you can not ...

Thank you for the kind words.

It is very strange that it is leaking uphill??? I will disassemble later this week...I thought it was all put together properly, but it is certainly not going to fix ...

http://s677.photobucket.com/albums/vv134/joeangi/?action=view&current=IMG_0980.jpg

http://s677.photobucket.com/albums/vv134/joeangi/?action=view&current=IMG_0982.jpg

http://s677.photobuc ...

I kinda assumed new pads....Didn't know if the sintered material absorbed, the disc does not rub (maybe because it is "lubricated")

Thanks for the reply....Not brake fluid....definitely fork. I will attempt a photo tonight.

If it was brake fluid, it would have eaten the paint on both the fork leg and the wheel.

Hi everyone, It has been a while since I last posted.

The K1100RS ('94) has been sitting in the garage for better than 3 weeks. It has not moved at all (I know it is a shame). Anyhow, the right fr ...

I too used to use the J&M intercom. I think it is the noise of the K-Bike that kills it. I had a spark induced noise that got louder with rpms. I finally gave up on the intercom.

I even notice ...

I had the same problem...worked on it for days. Tried heat, slide hammer everything I could think of. I even slid a piece of sandpaper down, and rotated the tube figuring I could get a couple thousand ...

Take a look at "4 Sevens" lights. Designed and sold to "Flashaholics". Great lights at reasonable prices. The Quark series is fantastic. Use code CPF8 for 8% off at checkout. (CPF ...

Jealous.....Just getting some equipment for camping together. I ordered a Gore Pass 3 tent the other night, and a Kermit chair is on the Fathers Day list...Heading off to Boy Scout Camp (Camp Read) th ...

Sounds like a vacuum leak to me, I don't know where to tell you to look first. Look around for a cracked hose.

Joe

The rounded part of the molded piece fits into the bolt hole (cavity) of the crankcase cover on the right side if I remember correctly. The pointy side should slip into the fairing lower between one o ...

I am hooked on the EAR ear soft grippers. They got a great write up on Web Bike World, so I figured I would try them. Love them! I also have the custom molded with and without music, but the EAR soft ...

I would be looking for a faulty ground. Possibly the main ground to frame. Is the battery charged? 12.8 V with no load could be deceptive.

I have been un-able to get mine to reset. I am going to take it to the dealership at some point. They do turn off, if I power up while rolling...
Joe