K11 Owners Group

Yes, everything as it should be, have over a thousand miles with the light flashing.

Gerard

Fault code referred to front sensor. On checking, the wire was split under the tank. Replaced the sensor, no fault code stored in memory but the left light still flashes constantly. Have tried resetti ...

Thanks Mike,
All this sounds expensive. Think I will just put both feet down when I stop and get a pair of boots with more support for the time being. Cheers

Thanks Robert,

Have been pointed in the direction of an engineer today who does adaptations to bikes. Hopefully he can sort something out.

Thanks again

Is it possible to get the gear change lever to the right hand side and the brake lever to the left? Screwed together left ankle giving some trouble and dont want to change the bike.

Thanks guys, I think the parts list is just going to get longer, battery seems to be held in place by gravity!

Sorry Steve, its a 96 K1100LTSE. Tim, thanks for the pics, I dont have those bits! More parts to order Mad

Steping away from the boot topic, can someone post a pic of the position the Mototronic unit gets mounted. My K11 is an ex police bike from Yorkshire (10 years with the police), had an owner for a yea ...

Hi Ernie,

The boot was subjected to quite a bit of oil, i.e. it could not have got any more saturated if I had dropped it in a bottle of oil! The grease is anyones guess, came in a white tube, no m ...

Hi Rene,

I was to go over to Scotland for a bike trip at the start of the month but the boot split the evening before the boat! No oil is leaking at stand still but i could smell it burning coming ...

I have recently changed the rubber boot on the clutch arm at the rear of the gearbox (approx 2 weeks ago). The new part has now torn but also appears to have melted. My question is; is there meant to ...

Any K riders out and about in Northern Ireland? Any organised meets etc?
Without sounding like an on-line dating agency, would like to meet up with other K riders. Cheers

Any K riders out and about in Northern Ireland? Any organised meets etc?
Without sounding like an on-line dating agency, would like to meet up with other K riders. Cheers

Ernie,

Fashioned dipstick from stainless steel rod worked great. Oil staying in the right place.

Thanks

G

Thanks Ernie

I explains why I had an oil leak, I measured from the bottom of the rod and not from the top! Lesson learnt. Thanks for the Link. Will let you know how I get on tomorrow.

Gerard

...

Thank you. The homeland is very wet and green and looking out the window, getting wetter! A drawing of the gauge would be excellant, thanks.

Thank you for the welocome & response. I made a DIY oil level dipstick from a welding rod with 116mm & 126mm marked on it. Got measurements from internet. I think there is a fair chance I have ...

Replaced the rubber boot/seal at clutch arm, went for a test run and gearbox oil was running from somewhere on top of the gearbox and onto the exhaust. Not a nice smell! Any ideas were the oil is leak ...