K11 Owners Group

well I was able to work on the brick today . well i hae to read up on this throttle linkage it is revving up way to far . i suppose its either throttle adjustment or the air flow meter adjustment . an ...

the gas is new pump is new plugs have been cleaned since the last running. the bike sat unused for a year the guy was unable ti physically ride it. the timing is off so i need to get that taken care ...

oh also im noticing that the exhaust is heating up fairly fast is this normal with 75 models ?

as far as i know it did run ok. the guy had it pretty well serviced i have the invoices for what was done by the mechanic. i cant imagine theres to much wrong it only has 31000 on it but who knows mor ...

it sat in the side stand for about a year until i got it . now its sitting on the center stand. i plan on digging in to this further im gonna change the filter and flush out the old oil. would it be s ...

just found a considerable amount of oil on the plugs when i pulled them out could this be due to the oil burning off or rings or a valve or valves that are sticking ? because oil was on all plugs and ...

well i have had it running since then and no smoking except for the exhaust this is the first time the bike has been run in over a year . im also haveing trouble with idle control and putting any thro ...

well i finally got the brick to start and idle for me . a small victory . after it had idled for a few i noticed smoke dripping down on to the exhaust . could this be old oil buning off or a valve iss ...

if i did do this right thats my babyim bringing back to life.

i hope i did this right ?

http://a6.sphotos.ak.fbcdn.net/hphotos-ak-ash4/216976_1646254716980_1255279730_31283108_7111322_n.jpg?dl=1

Look im just now figuring out alot about motorcycles in general I know my fair share of auto but thank god I found this site because everyone so far has been a big help im gonna pull my calipers apart ...

yeah it sat unused for a lil over a year and i was figuring i would have to over haul the calipers im strapped in the wallet at the moment but i plan on buying the kit in the near future

well im bringing the brick back to life i got it and the brakes were some what stuck like the calipers were engaged somewhat. so i bled some pressure just to free up the wheel so i could move it , i o ...

I started the other day to circulate new fluid into my front calipers and got what seems to me all the air out the system, and new clear fluid going through but the brakes will not work .

the mystery has been solved the reason it had no power was due to a broken ground line on the sending unit i fixed that and i have gas now. on the down side i now have to replace a few o rings but a s ...

yeah the original pump is toast and i just got a newer pump that works. and no i did not rebuild the master cylinder .

well i believe i have come to figure out what is going on and that is that the fuel sending unit is faulty there is power going to it but not the pump. could it possibly be the same bug that killed my ...

if i wanted to introduce a newer model injector computer on to a older bike can this be done ? the clip is the same right..?

well i have never claimed to be the smartest person but i finally unlocked the gas cap and stuck my ear to it and no power to the pump...ummmmmm the relay is good from looking at it so it must be the ...