K11 Owners Group

Hi. Does anybody out there know the Halfords equivalent oil filter code for the K bikes ? I seem to remember reading that the same filter fits a Subaru.

I am just about to carry out this work, but i just wanted some advice. It looks easier to connect the front engine breather to the existing vacuum rail (on the back of the throttle bodies), incorporat ...

Managed to find time to get out with my bike and have another look at this abs problem. I get a reading of 128 ohms from the plug where the sensor connects to the control unit. I get the same reading ...

Hi Tim, thanks again. i have tried all permutations of resetting, pulling fuse 5(which i believe removes stored fault codes) etc etc. still the same problem. Still get 3 flashes from the led test. The ...

Thanks Tim. Yes, traced wires back to the loom and then back to the abs unit. Plugged in a spare sensor, theres no sign of corrosion. Like i said earlier, when i put the bike away in August, everythin ...

Welli rmoved the tank and the relay box cover, replaced the fuse (3) and turned on the ignition and it was working again. I tested for abs fault codes and got a 3 flash code - front speed sensor chan ...

Well i tested today with an led. the code is 3. i have a spare front wheel sensor so i swapped it out but still got the same result. any suggestions of what to look at next gratefully received!!

Having just received loads of help with an ABS problem (going to Maplins on saturday to buy an LED) I was riding home this evening, just about home, turned on my right hand indicator and it stayed on, ...

Thanks for the help and advice given here. I have been and had a bit of a look today, basically shorted out pin 2 of the three pin connector with the blue cap as suggested, then turned on ignition and ...

My bike (K1100lt 98') has been tucked away since August last year and i have just got her out today. Been on an optimate the whole time and started almost instantly. ABS does not seem to be setting it ...

Thankyou for such a speedy response, i'll have a look now.

I am trying to locate a post relating to modification of the crankcase breather, not having much success Sad

. Can anybody please point me in the right direction? Thanks.

Can anybody out there please provide a link to the crankcase breather modification referred to by Jim earlier on this page? Thanks.

Does anyone out there have a link or links to posts relating to clutch replacement on a late K11LT. I would like to read a few before i carry out the work. I am also keen to find out about other thing ...

I am having a clearout in my workshop. I have a very nearly complete ex police K1100 LT. If you are looking for any parts drop me a line. Engine, gearbox and final drive are in perfect order (no leaks ...

Ended up buying this on ebay http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=290588853251&ssPageName=STRK:MEWNX:IT . I reckon this will do the job. Thanks, Dodge.

Does anyone know if a cover can be purchased for my K11 seat? The old vinyl has finally cracked (after 15 years so can't complain). Thanks, Dodge.

Having read many BMW owners having problems with their bikes due to dodgy electrical connections, I an going to clean any connectors that i can get at, and lubricate them with an appropriate product. ...

I am sure that i read somewhere that the nuts holding the header pipes to the cylinder head are made of copper. Maybe i dreamt this? Any info greatly accepted.. Dodge. Question

Grid,

I d try the cheapest things first. 10k to me is the life of plugs for a bike, the car I double that but, I would start there. I know a lot of people use different brands of plugs, I never ...