K11 Owners Group

Have you checked the operation of the TPS (Throttle Position Sensor)?

http://www.k11og.org/forum/viewtopic.php?t=2110

Mike

Hi John,

Thanks. I've heard of them and good reviews.

Mike

Hi John,

Which upholsterer did you use?

Mike

Yes, in the BMW Club Uk tool Hire facility we have the castellated tool for the threaded ring, as well as the drift for installing the new seal in it (but you could get away without that.

A little ...

Hi John,

Which seal are you referring to.

Mike

Yes we have MOT tests, but the ABS is not covered by it. They only test the efficiency of the brakes, so even if the ABS isn't working, the ABS2 module still allows full hydraulic brake capacity (unli ...

Because if you have one swapped out the charge light filament bulb for an LED version, the excitation current (to kick start the charging for the alternator) will be insufficient.

Having said that ...

Are the two warning lights flashing - together or alternately.

If the latter then, it's a sign of low voltage to the ABS caused by the first start up. Usually cleared by riding a mile or so, then t ...

Hi John,

You can get a full set of new NGK leads from Motorworks for £85.62 incl. VAT, although they don't have the tang t pull the HT cap off the plug.

I wouldn't have thought that the low id ...

The 4 off OEM bolts for the main fairing bracket are listed as M6 x 20 (grade 8 Cool

Max torque for this bolt is 10Nm (7.5 lb ft).

Now that is an unusual K100RS, what with it having an automatic transmission. Rolling Eyes

Mike

Wasn't there a K75 model with a similar colour tank?

Mike

Hi John,

It's the box marked 'H' in the diagram Jim posted.

Mike

Hi John,

As you have a second bike I would just swap over the relays to see if the fault follows the relay or stays with the bike.

Mike

When you put the shaft in did you use a bolt and spacer or did you just drift it in. If the latter there is a high chance that you have damaged the ceramic water seal.

Mike

You haven't said whether you changed the boot or not.

Mike

Have a look at what Motorworks are offering:

https://www.motorworks.co.uk/vlive/Shop/Parts.php?T=5&NU=15&M=40&Ct=JA&SbCt=BA_15_40_JA_49

Mike

The ABS2 system is usually very reliable.

The alternate flashing ABS lights can be caused by a low battery at start up. If it is a low battery, then if you ride for a few miles, then stop and immed ...

As the K1100 has the old three pin diagnostic connector, the GS-911 (without the discontinued adapter unit) will not connect to it.

Hexcode also produced standalone unit specifically for the R1100/ ...

I don't have access to membership details, but do know that you don't normally see the K series at the main dealer. I will be at Wollaston this coming Sunday and will probably be the only K1100.

La ...