K11 Owners Group

Rich! How are you?

The last 2 fuel pumps I got came from EME - reasonably priced - and probably a lot better than Chineseium...

Where do you think the EME ones come from?

Hint: Large nat ...

https://www.aliexpress.us/item/2251832627396462.html

The fuel pressure regulator keeps the right pressure at the fuel rail.

It's probably "easiest" to do if you remove the exhaust.

Take a picture of it before you disassemble. Will make reassembly easier.

To detach and attach the springs loop a piece of wire ...

Removing the side stand switch won't change the lean angle.

Those silver plates that rotate around up at the side stand pivot do more than trigger the side stand switch. They also control the sprin ...

https://www.bridgestonemotorcycletires.com/en-us/promotions/spring-2024-promotion-us

I've fixed numerous LT and RS mirrors with Devcon 5 minute epoxy. Works great.

https://www.k11og.org/forum/viewtopic.php?p=60092

Understanding and leveraging gravity works better than a pressure bleeder. Letting air bubbles float to the top works better than trying to force things.

I've tried both and my pressure bleeder nev ...

https://www.kbikeparts.com/classickbikes.com/ckb.tech/0.ckb.tech.files/brakelines/brakelines.htm

Cluster light: Fuel level sender grounds the white wire to the instrument cluster with 5-ish liters left. There is delay circuitry in the cluster so that it doesn't go on for a little while. If the de ...

The ABS system is more or less separate so it can be removed without impacting anything else.

For the side stand switch you can just short the two wires to each other at the connector.

The start ...

http://www.ebay.com/itm/225977908542

(I am not affiliated w/ seller.)

To reduce the K1100 gurgle you can undo the mounting nuts for the filler and hold it higher.

The stock warning bulbs are 3W. The 4W bulbs are for the two turn signal bulbs.

I run LEDs in my K11 clusters. They're 0.2W. And they're early LEDs so they are polarized and don't allow a reverse ...

Green wire which is switched power to the instrument cluster.

The Motronic grounds the coolant temp warning bulb to illuminate it.

160 is about normal for a K.

You can adjust when the fuel light comes on without bending the float rod. (Which is tempered and very hard to bend.)

You need to remove the fuel level sender from t ...

Here are the BMW wiring diagrams for a 94+ K1100 with English notation that I added:

http://www.kbikeparts.com/classickbikes.com/ckb.tech/0.ckb.tech.files/kwiring/K1100RS.94on/K1100RS.94on.Wiring.S ...

The temp sensor on the bottom of the water pump does not impact operation AT ALL. It only feeds the temp gauge.

The Motronic ECU reads the temp of the coolant coming off of the cylinder head's exit ...

Drove back from Seattle area (Copalis beach)

Sanjiv

Rolling Eyes

I think your Tesla has a bad GPS. Copalis is well over 100 miles from Seattle.

https://goo.gl/maps/DN9mtNTSEfQmBCy29

How many miles are the tires warrantied for? I've read that EVs eat tires more quickly due to the weight.