K11 Owners Group

My manual does not explain the throttle assembly very well.Basically there is no gave in the throttle. Always fully open. It will not spring back into position. I have not fully opened it up yet. So i ...

K1100LT.My front brake lever has been leaking some brake fluid recently and the front brakes
then locked one day plus the brake lever was hardly able to move. Now the front brakes
will not work nor ...

In Dublin mate.

Took my k1100 to a mechanic. He identified firstly the idle was wrong.
Corrected that. Only two to three cylinders running due to two faulty injectors.
Also the butterfly assembly will have to be fa ...

In order to test if the hall unit or sensor is at fault. I remove the t cover, turn the bike on at
say about 2000 rpm. Appy the heat gun and notice if the power goes awol?

I would be changing the fuel filter and making sure that the gas in the tank was fresh. Wouldn't hurt to run some injector cleaner through it.

Might also want to make sure some critters have not t ...

Check your ground (earth) connections going to the battery. You should have at least 2 heavy cables going to the negative side of the battery. My 97 LT had very similar symptoms and I found that I had ...

What size spark plug tool socket would i need for a bosch XR5DC, 17 or 18 mm? Anyone know a European website where i could order one would also be appreciated ?

My brick is ex police, and it has IC tagged on to the end, so you could be right. I must admit i had never really thought about this.

Cheers

Rich.She is ex UK police bike, hence called LTIC due ...

LTIC = Police specification I think

wouldn't that be LTP? (like the RTP)

She is ex UK police bike, hence called LTIC due to the mods

LTIC = Police specification I think

She is ex UK police bike, hence called LTIC due to the mods

BTW, what's the IC in K1100LTIC stand for? I've never seen that designation.

I've seen LTSE (LT Special Edition) and LTABS (LT w/ABS), but not LTIC.

She is ex UK police bike, hence called LTIC ...

I would be changing the fuel filter and making sure that the gas in the tank was fresh. Wouldn't hurt to run some injector cleaner through it.

Might also want to make sure some critters have not t ...

I would be changing the fuel filter and making sure that the gas in the tank was fresh. Wouldn't hurt to run some injector cleaner through it.

Might also want to make sure some critters have not t ...

Check your ground (earth) connections going to the battery. You should have at least 2 heavy cables going to the negative side of the battery. My 97 LT had very similar symptoms and I found that I had ...

I have a photo but unable to attach ?

What year is your bike? (Some of the 92 and early 93 bikes have K100RS4V peg plates.)

Hint: It really helps if you add the model and year of your bike to your signature.

1994 is the year ,L re ...

Might need a tap or two. I think one or more of the footpeg hanger mounting points engages on a projection at the end of the support bracket. The support bracket is steel and the footpeg hanger is all ...

The right mounting bracket which holds in the the rear brake pedal will not come off (Picture attached). I removed the three screws. The lower one was very hard to remove. I applied some lubricant but ...

About nearly two years ago my '94'k1100 got power issues. I eventually found out that the intake tubes were not in the best shape. Just replaced these. Now in fairness the bike has not been that activ ...