K11 Owners Group

Thanks Duck, will give it a try.

Need a little advice about tightening subject cable. Couldn't find anything in search. Anyone know of a link or video describing proper procedure? Thx.

Jim, been to Maggie Valley museum a few times. Dale (RIP) even dumped a can of Sea Foam in my rough running R100S one time to clean it up.

John, you no doubt had a great ride. That area is one of my favorites. Question for you. Somewhere I read that Wheels through Time was located at Gatlinberg, TN, however, I seem to remember it being i ...

In doing windshield repairs over time I only remember seeing one fairing bracket under there and it seemed tight. I'll have to look for more. That's,guys for the suggestions

Over the years I've never been able to get the noise going over sharp bumps out of my windshield assembly. Tried running with it all the way up and down with no improvement. When making repairs, I've ...

Got her done by just pushing hard. I had been trying to bang it on. Duh.
Thanks again.

Ok, I accidentally knocked off one of my mirrors. Didn't break, but I can't figure out how to snap it back on. Am I missing something obvious or a special trick? Thanks guys.

I got fed up with the ABS and removed it years ago. Took off 20-25 lbs of hardware. Only remember buying a new rear brake line.

I've pretty much worn out the 110/80 ZR 18 Bridgestone Battlax BT 023 and am looking for replacement suggestions. What's hot right now?

Thanks, BobZ.

Installed a different HES finally with good results. Bike started right up, idled and reved up nicely. Didn't do a test ride yet, still buttoning up bodywork, will finish up tomorrow.

Again, thanks ...

Anyone here ever use parts from EME Euromotoelectrics? Pricing looks uncommonly low.

Is that the GS-911 3-pin adapter? Nah, don't want to have to hookup the bike to a PC to read the codes. I think I can design myself an adapter that grounds any of the three pins. Smile

You don't have ...

Fault code 1133 is showing up. Indicates sensor problem on cylinders 2&3. Anyone here replaced a Hall Sensor on K1100? Didn't find much in search.

Part of Phil still rides with me. Plan to put him to rest in Mexico when I get down there. We had similar career ties across the border.

Uh huh, you guys.

N41EF thanks for the link.

I bought a set of Magnacore off eBay. The blue wires made the bike insignificantly faster!

Now that's what I'm talking about. Bring 'em on.

Yeah I actually had the cap twisting a little and pulled straight out with pliers. Top must have broken off with that move. Probably wiggling it a little too much.

Scott, PM me if you find anything ...

Ok, I've always had trouble removing wire caps from the spark plugs, but this time I really did it. Broke a plug off inside the cap and cannot remove the remains.

Unless someone knows of a magic tr ...